SX-515 AMPLIFIER MODULE LOAD CELL ( 123288 )

Product no.: 123288

In stock
can be shipped within 1 days

Old price 525.10 €
449.99
Price plus VAT, plus delivery


SX-515: Amplifier Module Load Cells. • amplifies and processes the signal of a load cell. • It can be fed to 9 VDC and 24 VDC and do not need symmetrical power supply (9 + 9V). • Solve the problem of loss of configuration parameters of the previous model SX-405, which and replaces obsolete. • Does not require permanent power supply circuit (SX-535 module) modules required for SX-405. • Do not use SUB-D 9-pin connectors and facilitates chained between modules by flat cable connections, simplifying assembly. • To replace an SX-405 ~ nte icamE a module is necessary to change the main connector and place an adapter for the communications cable. In 1 single head machines adaptation is simple and multi-head machines is possible to interleave an EP-515 module in a chain SX-405 modules, however in most cases it is preferable to continue using spare parts same SX-405 type since Guiran still supplied. • It has a "JUMPER" to insert a terminating resistor in the line of RS485 data. By Therefore, to replace the last module in the chain needs to be moved to the new module JUMPER to maintain RS485 line termination. • The operation of the letter and the communications status is monitored by an indicator green LED. When it flashes slowly, indicating that the module operates but does not communicate with the TFT. When flashing rapidly, it indicates that you are communicating properly with the TFT. • The state of the load cell is monitored with a red LED indicator: Red LED off red LED flashing red LED lights steadily Cell functioning properly cortoc: I ircuito in overload cell in the cell or the cell is not connected

Browse these categories as well: SERMAX SCALES, SERMAX SCALES LOAD CELLS, SERMAX SCALES ELECTRONICA MULTI-HEAD WEIGHERS PREVIOUS 2020